Help with Flowstone Area in Therion

felixrulz

New member
So, I have just started learning how to use Therion. I started by surveying a small extension I found a week ago or so as it seemed like a fairly straight forward passage.
I am having trouble with one of the areas I have told Therion to fill with flowstone...

You can see in the attached image
the flowstone is leaking out of the area I defined. It extends out in a small arc...
I have attached the images of the three lines I am using to define the area.

I have tried adding a 4th border line outside the walls, so that is is defined by 4 lines. But this didn't work... I also originally had the the line at the bottom of the flowstone joined to the lines above and below it. I have now split it up, but it also didn't fix the problem.



 

Attachments

  • Problem.JPG
    Problem.JPG
    64.9 KB · Views: 261
  • 1.JPG
    1.JPG
    33.2 KB · Views: 231
  • 2.JPG
    2.JPG
    40.7 KB · Views: 268
  • 3.JPG
    3.JPG
    36.3 KB · Views: 238

felixrulz

New member
Okay, so Nick (from this site) sent me an email and has helped me solve my problem.
There were too problems. Firstly, for some reason I had two areas of flowstone defined for that spot.
The second was that I needed to define the area so that it was fully enclosed. From my post above you can see I only used three lines.

Here are updated screen shots of my th2 file and the resulting pdf:

 

Attachments

  • fixed.JPG
    fixed.JPG
    50.6 KB · Views: 184
  • fixedpdf.JPG
    fixedpdf.JPG
    80.2 KB · Views: 170
Top