Bullpot Farm Rain Gauge - Not Working?

It was temporarily removed for bonfire night (don’t want it getting melted by the bonfire) and has yet to be put back up.
 
Glad to hear that people find it useful! I will try and remember to put a heads up here when it’s back — but you should also be able to tell by looking at its temperature reading. When it’s no longer a cosy 17C, it’s probably back outside again!
 
Glad to hear that people find it useful! I will try and remember to put a heads up here when it’s back — but you should also be able to tell by looking at its temperature reading. When it’s no longer a cosy 17C, it’s probably back outside again!
I certainly find it useful. It's my first port of call if I'm caving in the west.
 
If you go to map view on above link you can also find 1, 6 and 24 hour rain gauges at far gearstone (Ribblehead), beckermonds and littondale, as well as others scattered further afield
 
Thanks all for your responses.

I've updated the Speleodex tracker for the last few days to avoid suggesting there's been no rainfall over the period - I'll try and keep this up to date until the gauge is live again.
 
Sedbergh gauge shows almost no rain from last Monday up until this weekend - 2.6mm total last 7 days:

Ingleton high leys shows similar, although there was 0.5mm on 5th:
 
The gauge is showing "No data" for Thursday 19th December; anyone know if was there a problem?
If so, someone must have been on the case quickly because it's recorded data as normal from Friday onwards, so thank you! Of all the sources of weather information I consult regularly, I have to say the Bull Pot Farm gauge if probably the most valuable. (y)
 
The gauge is showing "No data" for Thursday 19th December; anyone know if was there a problem?
If so, someone must have been on the case quickly because it's recorded data as normal from Friday onwards, so thank you! Of all the sources of weather information I consult regularly, I have to say the Bull Pot Farm gauge if probably the most valuable. (y)
I spotted that the readings on that day seemed off - if Speleodex is showing "No Data" it's because something has caused me to doubt the (usually) zero reading and so I've removed the entry. The gauge itself on that day wasn't showing anything for most of its metrics (wind, humidity, etc) so I suspect there was some sort of fault. Seems to have been working for the last couple of days though. It does seem odd that it's got a zero for today, but it's showing plausible values for temperature etc, so I assume it's still in position
 
Dales gauges are showing anything from 0 (malham) to 3mm (littondale) in last 6 hours (& they aren't far apart - others are equally variable). Gauges don't record snow / hail until it melts, and it is still zero degrees up there
 
If the readings are uploaded, they should be correct. It looks like a load of readings weren’t uploaded in the last few days — this typically happens due to internet problems, or wireless connectivity problems. I’ve not been able to debug the problem enough to fix it perfectly.

You can see if a reading is missing (rather than present, but zero) by looking at one of the line chart variables (such as temperature) rather than a bar chart variable (such as rainfall). A missing reading will result in a missing point in the chart.
 
Back
Top