aquamole jim
Member
TopoDroid x has a dive mode when using the " Tester Level" when your in it, "T" symbol is shown, but what it does not tell you is how to enter the mode and exit it! 🙄
Any advice welcome!
Any advice welcome!
There is a way to calculate inclination using the depths at successive survey stations. My surveyor buddy has coded it to be useable in a Therion environment. I'm not a diver but he once was. It's in an early stage but we are confident it will be useable. I guess you are aware of this but the code manipulation makes this easy as you just enter the data etc.My way around: I can not find the dive mode, so when I get to a sump I will move on to paper, and just add the center line manually, on to topodroid, putting the inclination as zero, the data for the sump can then be taken from the paper notes and added to Survex avoiding topodroid for the sumps, the centre line will tie in the surveys.
There should be no need to calculate the inclination for input to Therion. There are various formats that Therion can accept one of them diving. It allows input of various depths.There is a way to calculate inclination using the depths at successive survey stations. My surveyor buddy has coded it to be useable in a Therion environment. I'm not a diver but he once was. It's in an early stage but we are confident it will be useable. I guess you are aware of this but the code manipulation makes this easy as you just enter the data etc.
Tom
Sorry! You also need to click Custom Keyboard !Thank you to every one!
1: home page then click on the three squares at top right of page
2: click settings
3: click "tester mode" then click custom settings
4: click survey Data
5: tick " Dive mode top of page