wellyjen
Well-known member
Clatterway Levels is now in the rigging guide, following an enquiry by Tim Dobson. After asking around the club, I was told that it was originally planned to go in during the early years of the century when the guide was started. At the time there was a shortage of simpler SRT trips with topos available. For some reason it never happened, so thanks Tim for the prod ! The current edition is now 13.1.
Currently, there are two stainless steel thru-bolts on the first pitch, however to ensure you are not rigging off one anchor, you'll need to use a dodgy looking home made rusty angle iron hanger. For the second pitch/handline/climb, the main drop is off a nice thread belay, but to rig an approach traverse you'd need to use two rusty angle iron hangers. These need small maillons, as most krabs won't fit through the holes.
Jen
Currently, there are two stainless steel thru-bolts on the first pitch, however to ensure you are not rigging off one anchor, you'll need to use a dodgy looking home made rusty angle iron hanger. For the second pitch/handline/climb, the main drop is off a nice thread belay, but to rig an approach traverse you'd need to use two rusty angle iron hangers. These need small maillons, as most krabs won't fit through the holes.
Jen