Author Topic: Peak District Rigging Guide. CCPC  (Read 7107 times)

Offline pwhole

  • forum hero
  • *****
  • Posts: 2821
    • Phil Wolstenholme website
Re: Peak District Rigging Guide. CCPC
« Reply #50 on: May 10, 2021, 10:33:16 pm »
One thing that's not entirely obvious (until you get there) is that the deviation on the pitch into the Bell Chamber needs to be very short - no more than about 15cm, due to the hade of the shaft, so a tiny sling or maybe just two or three krabs instead is sufficient. Obviously a rebelay would resolve the problem if the rope was long enough and you could be bothered.

Offline wellyjen

  • addict
  • **
  • Posts: 126
Re: Peak District Rigging Guide. CCPC
« Reply #51 on: May 18, 2021, 06:17:35 pm »
A minor update. For some of the Peak/Speedwell system topos there were links to the DCA (ex Hitch 'n' Hike) microguides. A link on the web page and a QR code on the topo. DCA have been revamping the web site and the links are broken. It doesn't seem possible to link to the pdf's directly any more. The links on the rigging guide page and the QR codes on the topos have been removed. The microguides are still available via the link and the web page tells you which microguide is appropriate for the respective topo. The new guide version is 13.8.
The affected topos are for Far Sump Extensions, George Cooper's Aven, Victoria Aven and the White River Series.
Can't sleep. Clowns will eat me.


Main Menu

Forum Home Help Search
SimplePortal 2.3.5 © 2008-2012, SimplePortal