Author Topic: Help with Flowstone Area in Therion  (Read 558 times)

Offline felixrulz

  • Newbie
  • *
  • Posts: 6
Help with Flowstone Area in Therion
« on: October 18, 2017, 08:03:04 am »
So, I have just started learning how to use Therion. I started by surveying a small extension I found a week ago or so as it seemed like a fairly straight forward passage.
I am having trouble with one of the areas I have told Therion to fill with flowstone...

You can see in the attached image the flowstone is leaking out of the area I defined. It extends out in a small arc...
I have attached the images of the three lines I am using to define the area.

I have tried adding a 4th border line outside the walls, so that is is defined by 4 lines. But this didn't work... I also originally had the the line at the bottom of the flowstone joined to the lines above and below it. I have now split it up, but it also didn't fix the problem.




Offline felixrulz

  • Newbie
  • *
  • Posts: 6
Re: Help with Flowstone Area in Therion
« Reply #1 on: October 18, 2017, 09:16:21 pm »
Okay, so Nick (from this site) sent me an email and has helped me solve my problem.
There were too problems. Firstly, for some reason I had two areas of flowstone defined for that spot.
The second was that I needed to define the area so that it was fully enclosed. From my post above you can see I only used three lines.

Here are updated screen shots of my th2 file and the resulting pdf: